infiniti ownership guide FAQ

Vehicle Personalisation & Customisations

There are a few steps to do that, here they are:

1. Turn ignition switch OFF.

2. Press the trip reset switch, and at the same time turn ignition switch ON.

3. Keep the trip reset switch for 1 second or more.

4. Press the trip reset switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)

5. You will see the “Work instruction code” in the top portion of information display, and self-diagnosis is started.

6. The mode switches in the order shown below each time the trip reset switch is pressed:

1	Work instruction code
2	Part number
3	Software code
4	EEPROM code
5	Hardware code
6	P.C.B code
7	Circuit check
8	Colour check
9	Error code
10	Warning/Indicator lamp check